Installing A Freestanding Dishwasher - Westinghouse WSU67381 User Manual

INSTALLATION
Correct
Incorrect
12
INSTALLATION
remove
entire internal
membrane
0�5–1�1m

Installing a freestanding dishwasher

If the under counter height is greater than 850mm,
the dishwasher can be installed without removing the
worktop�
If the under counter space is less than 850mm but greater
than 820mm the worktop will need to be removed�
To remove the worktop, remove the screws located at
the rear of the machine, then, from the front, push the
worktop towards the rear and lift�
To ensure stability of the dishwasher in an undercounter
installation, any gap between the dishwasher and the
underside of the countertop should be bridged with a
packing piece� This may be achieved by wedging a piece
of timber between the dishwasher and the underside of
the countertop�
benchtop
timber
wedging
piece
filler piece
to suit
installation
3mm gap