Loading Your Dishwasher - Westinghouse WSF6608 User Manual

LoAdiNg yoUR diSHWASHER

Correctly loaded dishes will result in the best energy
consumption, washing and drying performance. There
are two separate baskets for you to load your dishes into
your machine. You can load into the lower basket round
and deep items as pots with long handles, pot lids, plates,
salad plates and cutlery sets.
The upper basket has been designed for tea plates,
dessert plates, salad bowls, cups and glasses. When
placing long-stem glasses and goblets, lean them against
the basket edge, rack or glass support wire and not
against other items. Do not lean long glasses against one
another if they are unsupported, they may break. It is more
appropriate to locate the thin narrow parts into the middle
sections of baskets. You can place spoons among the
other cutlery sets in order to prevent them from sticking to
one another. You are recommended to use the cutlery grid
in order to obtain the best result. To avoid any possible
injuries, always place such long-handle and sharp-pointed
items such as serving forks, bread knives etc. with their
sharp points facing down or horizontally on the baskets.
TIPS & INFORMATION
TIPS AND INFoRMATIoN
Ensure the position of the dishware does not prevent the upper
or lower spray arm from turning.
Top BASKET cUp RAcK
These racks are designed to increase the capacity of the
top basket. You can place your glasses and cups on the
racks. You can adjust the height of these racks. Thanks to
this feature, you can place different sizes of glasses under
these racks. The cup racks can be adjusted to 3 height
positions. In addition, you can place long forks, knives and
spoons on these racks laterally, so that they do not block
the revolution of the spray arm.
1
LoADING
14
2
Top BASKET foLdiNg SUppoRTS
Foldable racks on the upper basket are designed in order
to let you place big items easier such as pots, pans, etc.
If requested, each part can be folded separately, or all of
them can be folded and larger spaces can be obtained.
You can use foldable racks by raising them upwards,or by
folding down.
Top BASKET HEigHT AdjUSTMENT WHiLE iT iS fULL
Basket height adjustment mechanism on the top basket of
your machine is designed to let you adjust the height of
your top basket (refer to diagram
diagram ) downwards, without removing it from your
2
machine when it is full, and create large spaces at the top
or bottom area of your machine as needed. Basket of your
machine is set to upper position in factory settings.
In order to raise your basket, hold it from both sides and
pull it upwards. In order to lower it, hold it from both sides
again, pull upwards and lower carefully.
Make sure that both sides are in the same position
(up or down).
1
) upwards or (refer to
1
2
LoADING