. You • If you wish to discard this product, please contact may not be able to claim on the Westinghouse your local authorities and ask for the correct method manufacturer’s warranty in the event that your of disposal .
IMPORTANT SAFETY INSTRUCTIONS • Only original spare parts should be used with the These warnings have been provided in the interest of machine . safety . You MUST read them carefully before installing or using the appliance . • Before commencing the dishwasher installation, be sure that the machine is unplugged .
SAFETY INFORMATION AND RECOMMENDATIONS • Cigarette ashes, candle leftovers, polish, paint, chemical substances, iron-alloy materials; WARNING WARNING Do not leave your dishwasher’s door open, this may lead • Forks, spoons and knives with wooden or bone, ivory to accidents and injury. or nacre-coated handles;...
DESCRIPTION OF YOUR APPLIANCE Worktop Rating plate Upper basket with racks Control panel Upper spray arm Detergent and rinse-aid dispenser Lower spray arm Cutlery basket Filters Active drying unit Lower basket Ceiling spray rose TECHNICAL SPECIFICATIONS Capacity ..............15 place settings •...
Page 6
DESCRIPTION OF YOUR APPLIANCE option button again, and check that the indicator light on Power button the option button goes off. When pressed on, the machine is energised and the power light illuminates . Progress indicator Lights Program status can be monitored via the progress Hygiene button indicator lights on control panel .
QUICK START GUIDE Select the program The START/PAUSE button turns Switching on the machine via the PROGRAM off once the program starts selector button and the WASH light is on Press the POWER button Additonal functions Start the program pressing the START/PAUSE button Once the POWER button is pressed, the START/PAUSE...
INSTALLING THE MACHINE Positioning the machine the hose . • The first time you use the appliance, make sure that • When considering the location for the dishwasher, there is no leakage . ensure that there is adequate space to enable •...
INSTALLING THE MACHINE WARNING Water drain hose WARNING The water drain hose can be Electrical Connection connected either directly to the water drain hole or to the The plug of your machine should be connected to an earthed sink outlet spigot . Using a outlet that supplies suitable voltage and current .
Page 10
INSTALLING THE MACHINE 4 Adjust the machine feet according to the slope of the floor . Fit your machine by pushing it undercounter without letting the hoses get crushed or bent . WARNING WARNING After removal of worktop, ensure the opening for the dishwasher is according to the following dimensions .
PREPARING THE MACHINE FOR USE Prior to using the machine for the first time If your dishes are from the previous day and there is dried food waste on them, or if you have fully loaded the • Check whether the electricity and water supply dishwasher, pour 5cm detergent onto the base of the specifications match the values indicated by the...
PREPARING THE MACHINE FOR USE When you STOP using combined detergents Push the program (button 5 as shown above) and hold it down . • Fill the rinse aid compartments . Turn on the machine (button 1) . • Select a suitable rinse aid setting . Hold down the program button (5) until “r:A”...
LOADING YOUR DISHWASHER Correctly loaded dishes will result in the best energy consumption, washing and drying performance . There are two separate baskets for you to load your dishes into your machine . You can load into the lower basket round and deep items as pots with long handles, pot lids, plates, salad plates, and cutlery sets .
Page 14
LOADING YOUR DISHWASHER Spoon rack/Glass Support It allows your long-stemmed glasses to be washed safely as well as providing a convenient alternative location to wash spoons and forks . Do not lean your long-stemmed goblets and glasses against each other but towards the spoon rack, so that during the washing cycle this prevents glasses and goblets from being damaged .
Page 15
LOADING YOUR DISHWASHER Lower Basket Folding Racks Folding tines (prongs) consisting of four parts that are located on the lower basket of your machine are designed in order to let you place big items easier such as pots, pans, etc . If required, each rack can be folded separately, or all of them can be folded and larger spaces created .
PROGRAM DESCRIPTIONS Program items NAME OF RINSE** FAST 30 ECO* TIME SAVE HEAVY INTENSIVE PROGRAM WASHING 40°C 50°C 65°C 60°C 65°C TEMPERATURE TYPE OF FOOD Pre wash to Fresh Fresh Baked on Fresh Dishes with SOILS rinse and coffee, coffee, soup, sauce, coffee, dense dried...
SWITCHING ON THE MACHINE AND SELECTING A PROGRAM Switching on the machine Press the POWER button You can choose an Select the program suiting your additonal function dishes via the PROGRAM button Start the program by pressing the START/PAUSE key Progress indicator You can follow the program flow using the progress indicator lights located on the control panel .
Cancelling a program If you would like to cancel a program while a washing program is in progress . Press and hold the START/PAUSE button for approx . 3 sec . until END light blinks After END light starts blinking, the water inside is discharged for approx .
MAINTENANCE AND CLEANING Swtich off the power supply or disconnect the product before any maintenance or cleaning operation . Cleaning the machine at regular intervals prolongs the machine’s service life . Oil and lime may accumulate in the machine’s washing section .
MAINTENANCE AND CLEANING Spray arms Check whether the holes for the upper and lower spray arms are clogged . If there is any clogging, remove the spray arms and clean them under water . You can remove the lower spray arm by pulling it upwards, while the upper spray arm can be removed by turning the lock nut to the left .
FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE Leak detection • Switch off the dishwasher and close the tap . • Contact the service centre . Draining fault • Cancel program and power off machine, then check the following . •...
TROUBLESHOOTING PROBLEM SOLUTION If one of program monitor lights is on • Your machine’s door is open, shut the door . and start/pause light is flashing If the program won’t start • Check if the plug is connected . • Check your indoor fuses . •...
(c) ‘ASC’ means Electrolux’s authorised serviced centres; the Appliance; (d) ‘Westinghouse’ is the brand controlled by Electrolux Home Products In addition, Electrolux is not liable under this warranty if: Pty Ltd of 163 O’Riordan Street, Mascot NSW 2020, ABN 51 004...
Page 28
. your ability to make a claim under the Westinghouse manufacturer’s warranty provided with your product. • If you wish to discard this product, please contact...
IMPORTANT SAFETY INSTRUCTIONS • Only original spare parts should be used with the These warnings have been provided in the interest machine . of safety . • Before commencing the dishwasher installation, You MUST read them carefully before installing or be sure that the machine is unplugged .
SAFETY INFORMATION AND RECOMMENDATIONS For your children’s safety WARNING WARNING • After removing the machine’s packaging, make Some dishwasher detergents are strongly alkaline . sure that the packaging material is out of reach They can be extremely dangerous if swallowed . Avoid of children .
DESCRIPTION OF YOUR APPLIANCE Worktop Rating plate Upper basket with racks Control panel Upper spray arm Detergent and rinse-aid dispenser Lower spray arm Cutlery basket Filters Active drying unit Lower basket Ceiling spray r TECHNICAL SPECIFICATIONS Capacity ............. . . 15 place settings •...
Page 32
DESCRIPTION OF YOUR APPLIANCE Power button Progress indicator Lights When pressed on, the machine is energised and Program status can be monitored via the progress the power light illuminates . indicator lights on control panel . • Wash Hygiene button •...
QUICK START GUIDE Select the program via The START/PAUSE button turns Switching on the machine the PROGRAM selector off once the program starts button and the WASH light is on Press the POWER button Additonal functions Start the program pressing the START/PAUSE button Once the POWER button is pressed, the START/PAUSE...
INSTALLING THE MACHINE Positioning the machine After the connections are made, the tap should be turned on fully and checked for water tightness . For the • When considering the location for the dishwasher, safety of your machine, make sure to always turn off ensure that there is adequate space to enable the water inlet tap after each wash program is finished .
INSTALLING THE MACHINE WARNING Water drain hose WARNING The water drain hose can be Electrical Connection connected either directly to the water drain hole or to The plug of your machine should be connected to an earthed the sink outlet spigot . Using outlet that supplies suitable voltage and current .
Page 36
INSTALLING THE MACHINE 4 Adjust the machine feet according to the slope of the floor . Fit your machine by pushing it undercounter without letting the hoses get crushed or bent . WARNING WARNING After removal of worktop, ensure the opening for the dishwasher is according to the following dimensions .
PREPARING THE MACHINE FOR USE Prior to using the machine for the first time Generally, combined detergents produce acceptable results under certain usage conditions only . These • Check whether the electricity and water supply detergents contain rinse aid in preset amounts . specifications match the values indicated by the Points to consider when using these type of products: installation instructions for the machine .
PREPARING THE MACHINE FOR USE When you STOP using combined detergents TIPS AND INFORMATION TIPS & INFORMATION • Fill the rinse aid compartments . Only use rinse aid suitable for automatic dishwashers . • Select a suitable rinse aid setting . As rinse aid residues left as a result of overflowing will create extremely high amounts of foam and reduce the Filling with rinse aid and making the setting...
LOADING YOUR DISHWASHER Correctly loaded dishes will result in the best energy consumption, washing and drying performance . There are two separate baskets for you to load your dishes into your machine . You can load into the lower basket round and deep items as pots with long handles, pot lids, plates, salad plates, and cutlery sets .
Page 40
LOADING YOUR DISHWASHER Spoon rack/Glass Support It allows your long-stemmed glasses to be washed safely as well as providing a convenient alternative location to wash spoons and forks . Do not lean your long-stemmed goblets and glasses against each other but towards the spoon rack, so that during the washing cycle this prevents glasses and goblets from being damaged .
Page 41
LOADING YOUR DISHWASHER Lower Basket Folding Racks Folding tines (prongs) consisting of four parts that are located on the lower basket of your machine are designed in order to let you place big items easier such as pots, pans, etc . If required, each rack can be folded separately, or all of them can be folded and larger spaces created .
PROGRAM DESCRIPTIONS Program items WASHING 40°C 50°C 65°C 60°C 65°C TEMPERATURE TYPE OF FOOD Pre wash to Fresh Fresh Baked on Fresh Dishes with SOILS rinse and coffee, coffee, soup, sauce, coffee, dense dried loosen food milk, tea, milk, tea, pastry, egg, milk, tea, on soils or...
SWITCHING ON THE MACHINE AND SELECTING A PROGRAM Switching on the machine Press the POWER button You can choose an Select the program suiting your additonal function dishes via the PROGRAM button Start the program by pressing the START/PAUSE key Progress indicator You can follow the program flow using the progress indicator lights located on the control panel .
Cancelling a program If you would like to cancel a program while a washing program is in progress . Press and hold the START/PAUSE button for approx . 3 sec . until END light blinks After END light starts blinking, the water inside is discharged for approx .
MAINTENANCE AND CLEANING Swtich off the power supply or disconnect the product before any maintenance or cleaning operation . Cleaning the machine at regular intervals prolongs the machine’s service life . Oil and lime may accumulate in the machine’s washing section .
MAINTENANCE AND CLEANING Spray arms Check whether the holes for the upper and lower spray arms are clogged . If there is any clogging, remove the spray arms and clean them under water . You can remove the lower spray arm by pulling it upwards, while the upper spray arm can be removed by turning the lock nut to the left .
FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE Leak detection • Switch off the dishwasher and close the tap . • Contact the service centre . Draining fault • Cancel program and power off machine, then check the following . •...
Page 50
TROUBLESHOOTING PROBLEM SOLUTION If one of program monitor lights is on • Your machine’s door is open, shut the door . and start/pause light is flashing If the program won’t start • Check if the plug is connected . • Check your indoor fuses . •...
(c) ‘ASC’ means Electrolux’s authorised serviced centres; the Appliance; (d) ‘Westinghouse’ is the brand controlled by Electrolux Home Products In addition, Electrolux is not liable under this warranty if: Pty Ltd of 163 O’Riordan Street, Mascot NSW 2020, ABN 51 004...