Control Panel A33 - ESAB Caddy A32 Instruction Manual

1 INTRODUCTION
1.3

Control panel A33

1. Display
2. Indication of which parameter is shown in the display (current or percent)
4. Knob for setting data (current or percent)
5. Buttons for weld data memory settings. See "Welding data memory" chapter.
6.
Button for choosing parameters "Hot start"
when MMA welding
7. Choice of welding method MMA
9. Setting from panel
10. Display of VRD function (reduced open-circuit voltage)
Measured value in the display for welding current A, is arithmetic average value = rectified
average value.
0460 449 274
or TIG
or connecting remote control unit
- 4 -
or arc pressure "Arc force"
© ESAB AB 2013