Operation; General; Joint--Tracking Unit With Control Panel - ESAB GMH Instruction Manual

GB
4

OPERATION

4.1

General

General safety regulations for the handling of the equipment can be found on
page 85. Read through before you start using the equipment!
4.2 Joint- -tracking unit with control panel
Emergency stop (1)
One press on the button activates EMERGENCY STOP
S
NB! An emergency stop must never be reset before the cause of the abnormal
function or signal has been established and rectified.
Signal lamp
Illuminates when the power has been switched on.
S
Alarm lamp (automatic joint- tracking)
Illuminates when the guide finger is outside the working range (vertical).
S
The automatic function is then blocked.
Signal lamp (joint- - tracking)
Illuminates when automatic joint--tracking is in progress.
S
hga1o1ea
(white)
(green)
- - 92 - -
(yellow)