Danfoss PVED-CLS Startup Manual page 38

Hide thumbs Also See for PVED-CLS:

Table of Contents

Application Guide

PVED-CLS startup guide

Parameter setting

38 |

Danfoss | October 2018

PVED-CLS auto calibration— spool dead-band

If the parameter change is not described below, use the default values.

Spool Dead-band Calibration values set the behavior of the Auto Spool Calibration routine which finds

the Closed Loop dead-band edges for the spool calibration.

See Section 9.4.1.1 in the User Manual for more detailed descriptions of the parameters.

Example parameter settings

AB285975085591en-000101

Table of Contents