Technical Specifications - SPHINX Project Eighteen Service Manual

SPHINX Project Eighteen Service Manual

5. TECHNICAL SPECIFICATIONS

Bandwidth
Phase response error
Gain
Minimum Power Output (1 - 20,000 Hz, 1 W = 0
dBW)
Output voltage / current, max.
THD+N (IHF-A)
IMD
S/N ratio (IHF-A)
Common Mode Rejection Ratio
Slew rate
Damping factor
Input
level, nominal
impedance
Supply capacitance
Power consumption
Power transformer, primary
secondary 1 & 2
secondary 3 & 4
secondary 5 & 6
Maximum DC-offset
Short circuit protection
Dimensions (h x w x d)
Weight
This unit conforms to the EMC interference regulations issued by the EU and to the CE standards.
This unit complies with safety regulation VDE 0860 and therefore with international safety regulation IEC 65.
Technical specifications may be changed by SPHINX without prior notice if technical developments make this
necessary.
0 – 100,000 Hz (+0/-1 dB)
<1° (0 - 20,000 Hz)
30 dB max.
>2x 160 W into 8 ohm (22.0 dBW), THD <0.01%
>2x 280 W into 4 ohm (24.5 dBW), THD <0.01%
>2x 420 W into 2 ohm (26.2 dBW), THD <0.01%
36 V / 43 A
<0.01% (@1 W into 8 ohm, 1 - 20,000 Hz)
<0.01% (@ 100 W into 8 ohm)
>120 dB
>80 dB (@ 100 Hz)
>50 V/µs
>2000 (1 – 20,000 Hz)
XLR balanced / cinch WBT unbalanced
1.25 V (1.9 dBV) / 1.25 V (1.9 dBV)
600 ohm / 20 kohm
132,000 µF total
1500 W max. (70 W standby)
230 VAC / 115 VAC
42.5 V / 7.1 A
15 V / 1 A
60 V / 0.1 A
+0.5 V and –0.5 V
Fuse per channel
143 x 482 x 452 mm
24 kg
6