Care And Maintenance; Technical Specifications - SPHINX Project Two Mk2 User Manual

7. CARE AND MAINTENANCE

Clean the exterior with a soft, lint-free, anti-static
cloth. Do not use force while wiping the surface.
To remove difficult stains use a few drops of
detergent on a moist cloth, sweep carefully and
wipe dry afterwards.
If some scratching occurs, please first consult your
Sphinx dealer. He can give you advice about
possible solutions.

8. TECHNICAL SPECIFICATIONS

Bandwidth
Phase response error
Gain
THD+N (IHF-A)
IMD
S/N ratio (IHF-A)
Channel separation
Inputs
level, nominal (for 1 V output)
impedance
Outputs
level
impedance
Volume control
channel imbalance
Sphinx Control
Remote control
Mechanical decoupling of housing
Power supply
Supply capacitance
Power consumption
Dimensions (h x w x d)
Weight
This unit conforms to the EMC interference regulations from the EU and to the CE standards.
This unit complies with safety regulation VDE 0860 and thus with international safety regulation IEC 65.
Technical specifications can be changed by SPHINX without prior notice if technical developments make this
necessary.
©1999 Audioscript BV
SPHINX
Do not use polishing or cleaning agents: they
may damage the sensitive acrylic finish.
Do not use aerosol cleaning agents.
Most contain solvents which might actively react
and damage the acrylic finish.
0 - 500,000 Hz (+0/-3 dB)
<0.5°
18 dB max.
<0.0015% (2nd harm., 10 - 20,000 Hz)
<0.003%
>100 dB
>100 dB
1 x XLR balanced
5 x cinch unbalanced (goldplated)
0.13 V (-18 dBV)
XLR: 10 k
1 x XLR balanced
2 x cinch unbalanced (goldplated)
1 x cinch Tape (goldplated)
9.2 V max. (19.3 dBV) (1 - 100,000 Hz, THD <0.002%)
<10
ALPS motorized
less than 2 dB
1 x optical
Full function
Transrotor absorbing 'pucks'
External, completely stabilized
35,200 µF total
15 W stand-by
17.5 W 'on'
68 x 482 x 328 mm
11 kg
Project Two Mk2
/ cinch: 50 k
11