Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SPHINX Project Twelve
Summary of Contents for SPHINX Project Twelve
-
Page 1: User Manual
USER MANUAL PROJECT TWELVE MONO POWER AMPLIFIER... -
Page 2: Table Of Contents
SPHINX Project Twelve 1. UNPACKING ............................3 2. SPHINX WARRANTY CARD ......................3 3. THE POWER AMP AT A GLANCE.....................4 Front panel..............................4 Rear panel ..............................5 4. INSTALLATION AND CONNECTIONS ....................6 Installation..............................6 Connections in general ..........................6 Connecting loudspeakers ..........................6 Connecting the input............................ -
Page 3: Unpacking
If you need bandwidth. to transport your Project Twelve at a later time it will The extremely low output impedance results in a be best protected by the original packing materials. -
Page 4: The Power Amp At A Glance
SPHINX Project Twelve 3. THE POWER AMP AT A GLANCE Front panel LED: Indicates the selected function: STANDBY: To switch the component on and stand-by off. green protection blinking red. -
Page 5: Rear Panel
(230 - 240 VAC). CONTROL IN: To connect the optical cable OUTPUT: To connect the cable from the from another Sphinx component like a pre-amp. loudspeaker: CONTROL OUT: To connect the optical cable that goes to another Sphinx component. -
Page 6: Installation And Connections
4. INSTALLATION AND CONNECTIONS Installation Connecting loudspeakers Make sure you place the Project Twelve on a stable We recommend using a double pair of cables, if this and sturdy support, it weighs over 6.5 kg. is possible with the loudspeaker (one pair for the highs and another for the lows). -
Page 7: Connecting The Mains Cable
The power amp also warms up more quickly so you will be able to enjoy maximum performance without If you use more than one Project Twelve you should significant delay. connect them all to the same mains outlet and phase. -
Page 8: Operation
5. OPERATION period (e.g. during holidays) should you switch the amp off with the POWER switch (5.). Connect the mains cable of the Project Twelve to a In stand-by mode the Project Twelve's power mains outlet. consumption is around the 5 W mark. - Page 9 SPHINX Project Twelve Should for some reason the mains fuse be blown, you should replace it with a new one of exactly the same type and rating: 5x20 mm 250 VAC / 3.15 A / slow The fuse (7.) is located at the rear panel next to the mains connector (8.).
-
Page 10: Care And Maintenance
This unit conforms to the EMC interference regulations issued by the EU and to the CE standards. This unit complies with safety regulation VDE 0860 and therefore with international safety regulation IEC 65. Technical specifications may be changed by SPHINX without prior notice if technical developments make this necessary.
Need help?
Do you have a question about the Project Twelve and is the answer not in the manual?
Questions and answers