Technical Specifications - SPHINX Project Two MKII Service Manual

SPHINX Project Two Mk2

7. TECHNICAL SPECIFICATIONS

Bandwidth
Phase response error
Gain
THD+N (IHF-A)
IMD
S/N ratio (IHF-A)
Channel separation
Inputs
level, nominal (for 1 V output)
impedance
Outputs
level
impedance
Volume control
channel imbalance
Sphinx Control
Remote control
Mechanical decoupling of housing
Power supply
Supply capacitance
Power consumption
Dimensions (h x w x d)
Weight
This unit conforms to the EMC interference regulations issued by the EU and to the CE standards.
This unit complies with safety regulation VDE 0860 and therefore with international safety regulation IEC 65.
Technical specifications may be changed by SPHINX without prior notice if technical developments make this
necessary.
©1998 Audioscript BV
Service Manual
0 - 500,000 Hz (+0/-3 dB)
<0.5°
18 dB max.
<0.0015% (2nd harm., 10 - 20,000 Hz)
<0.003%
>100dB
>100 dB
1x XLR balanced
5x cinch unbalanced (gold-plated)
0.13 V (-18 dBV)
XLR: 10 kohm / cinch: 50 kohm
1x XLR balanced
2x cinch unbalanced (gold-plated)
1x cinch Tape (gold-plated)
9.2 V max. (19.3 dBV) (1 - 100,000 Hz, THD
<0.002%)
<10 ohm
ALPS motorised
less than 2 dB
1x optical
full function
Transrotor absorbing 'pucks'
external, completely stabilised
35,200 µF total
15 W stand-by
17,5 W 'on'
68 x 482 x 328 mm
11 kg
9