Will Burt NIGHT SCAN Operator's Manual page 9

'
N S U R C S O M
IGHT CAN NIVERSAL EMOTE ONTROL YSTEM PERATOR S ANUAL
Mounting Structure Hazard! Before operation, be certain the mounting structure is capable of
resisting forces generated from all loading and environmental conditions including, but not
limited to system size and weight, payload size and weight, sail size, wind speed, and ice
loading. The mounting hardware must include proper means to resist vibration loosening such
as thread-locking compound or locking hardware. Mounting the system to a structure unable to
resist the forces generated from customer-specific loading scenario could result in death or
serious injury and could damage the system.
Mast Extension Hazard! Extending mast into obstructions could result in death or serious
injury and could render the mast inoperable and partially extended. Before applying power and
operating the mast, be certain there is sufficient clearance above and to all sides of the
expected location of the fully extended mast and payload. Keep all persons clear of mast and
mast extension. Do not lean directly over the mast.
Relocation Hazard! Relocating the mast during operation or after extension could result in
death or serious injury. Do not relocate the mast during operation or while extended. This
applies especially to masts mounted to vehicles. Operate the mast only if the vehicle is
stationary and the vehicle engine is off.
Safety Instruction – Operation! For outdoor use only. Do not use in areas that have been
classified as hazardous as defined in Article 500 of the National Electric Code.
Safety Instruction – Keep Clear! Keep personnel clear of the Mast System during operation.
Fire Hazard! Do not use in the presence of flammable gases or liquids such as paint, gasoline
or solvents. Do not use in areas of limited ventilation or where high ambient temperatures are
present. Contact with combustible materials can cause ignition resulting in fire or explosion.
Temperature! During charging, the ambient temperature needs to be between 41°F and 113°F
(5°C and 45°C).
Safety Instruction – Power! Make sure all power has been disconnected prior to performing
maintenance.
Batteries! If using non-rechargeable batteries, do not use the charger.
TP-5543301-C vii
July 2018