Wireless Hhrc Charging; Figure 3-2 Battery Charger; Table 3-2 Electrical Specifications - Will Burt NIGHT SCAN Operator's Manual

3.6 Wireless HHRC Charging

This section describes charging the Wireless HHRC. See Table 3-2 for information pertaining to
electrical specifications for the system.
Functional Characteristic
Power Supply
Current Consumption
Charging Time
Charging Temperature
Operation Time
* Note:

Communication frequency is U.S. legal. Customer is responsible for ensuring remote frequency is legal in
country of use.

Dimensions and specifications are provided for reference only and are not intended for vehicle design
purposes.

Specifications may be subject to change without notice.
Temperature! During charging, the ambient temperature needs to be between 41°F and 113°F
(5°C and 45°C).
To charge the Wireless HHRC, connect the Wireless HHRC to the battery charger on the
Control Box (Figure 3-2). When the Wireless HHRC is charging, the blue Charging LED will
blink. When the Wireless HHRC is fully charged, the blue Charging LED will be lit.
Charging
Dock
TP-5543301-C
July 2018
N S U
IGHT CAN NIVERSAL

Table 3-2 Electrical Specifications

Specification*
12 Volt (Constant)
<15 mA (idle)
200-900 mA during charging (depending on supply voltage)
2 Hours and 20 Minutes
41°F to 113°F (5°C to 45°C)
Up to 40 hours of operation (depending on usage of LED and
display)

Figure 3-2 Battery Charger

R C S
EMOTE ONTROL YSTEM
'
O M
PERATOR S ANUAL
3-7