N
S
U
IGHT
CAN
NIVERSAL
4.6 Wireless HHRC Battery Replacement
This section describes replacement of the batteries in the Wireless HHRC.
Batteries! If using non-rechargeable batteries, do not use the charger.
To replace the Wireless HHRC batteries:
1. Remove the belt clip by unscrewing the screws holding it in place.
2. Unscrew the four screws securing the lid and remove the lid.
3. Remove the batteries.
4. Remove all dirt and dust to ensure not water can enter the unit.
5. Insert the new batteries being sure to check the polarity.
6. Reattach the lid.
7. Reattach the belt clip screws.
4-6
R
C
S
EMOTE
ONTROL
YSTEM
Figure 4-6 Remove Screws Securing Belt Clip
Remove
Screws
Figure 4-7 Remove Screws Securing Lid
'
O
M
PERATOR
S
ANUAL
Remove
Screws
TP-5543301-C
July
2018