Inspections; Cleaning; Table 4-2 Inspections - Will Burt NIGHT SCAN Operator's Manual

N S U
IGHT CAN NIVERSAL

4.3 Inspections

Table 4-2 lists inspections to be done periodically.
Action
Ensure that all safety-related functions
including emergency stop functions work.
Inspect for damage. If damage is apparent,
do not use the Night Scan Wireless Remote
Control System and have it serviced prior to
use.
Inspect to ensure the Night Scan Wireless
Remote Control System is kept clean and
free from foreign material. If necessary, clean
the Night Scan Wireless Remote Control
System (Section 4.4).
Visually inspect to ensure all hardware is in
place. If hardware is found loose, retighten.
Visually inspect to ensure all cables are
undamaged and properly terminated.

4.4 Cleaning

This section describes cleaning the Night Scan Wireless Remote Control System.
Damage! Never use acids, alcohol, or thinner when cleaning the Night Scan Wireless Remote
Control System as these may dry up gaskets, significantly reducing the capacity to prevent
water/moisture ingress. Never use high-pressure to clean the Night Scan Wireless Remote
Control System as this may shorten the lifespan of the product or damage it.
As necessary, use a damp cloth to remove any debris from the Night Scan Wireless Remote
Control System.
4-2
R C S
EMOTE ONTROL YSTEM

Table 4-2 Inspections

'
O M
PERATOR S ANUAL
Frequency
Daily (or immediately if suspicion of
malfunction).
As needed.
As you work and as needed.
Monthly.
Monthly.
TP-5543301-C
July 2018