Section 4 Maintenance; Pre-Maintenance Check; Maintenance Equipment; Table 4-1 Equipment Recommended For Maintenance - Will Burt NIGHT SCAN Operator's Manual

Section 4
This section describes the routine maintenance and adjustment procedures required to keep
your system operational.

4.1 Pre-Maintenance Check

Before performing maintenance procedures, ensure:

All operators read and understand the entire maintenance procedure and are properly
trained

The system is level, secure, and stationary

The following precautions are understood and followed:
Safety Instruction – Power! Make sure all power has been disconnected prior to performing
maintenance.
Equipment Damage – Qualified Personnel! All persons installing and maintaining this
equipment should be suitably qualified and work to local, regional, and national standards and
codes of practice.

4.2 Maintenance Equipment

Table 3-1 lists recommended equipment for maintenance.
Personal Protective
Safety Glasses
Hearing Protection
* Note:

Depending on the local, regional, and national standards and codes of practice, and the environment,
additional personal protective equipment may be necessary.

When disposing of any disposables or components, do so according to any applicable local, regional, and
national standards and codes of practice.
TP-5543301-C
July 2018
N S U
IGHT CAN NIVERSAL
Maintenance

Table 4-1 Equipment Recommended for Maintenance

Recommended Equipment*
Safety Gloves
Hard Hat or Helmet
R C S
EMOTE ONTROL YSTEM
Safety Shoes
'
O M
PERATOR S ANUAL
4-1