Specific Safety Precautions - Will Burt NIGHT SCAN Operator's Manual

'
N S U R C S O M
IGHT CAN NIVERSAL EMOTE ONTROL YSTEM PERATOR S ANUAL
Safety Instruction – Read Manual! Failure to follow operating instructions could result in death
or serious injury. Read and understand the operator's manual before using the mast.
Safety Equipment! Helmets or hard hats, eye protection, gloves, and safety shoes must be
properly worn while working in the deployment area. Death or serious injury could result if
proper safety equipment is not properly worn.
Tip Over Hazard! Mast tip over could result in death or serious injury. Do not operate in high
winds. Operate on level ground only. Stand clear of mast and mast payload during operation.
Be certain mast is level and secure before and during installation, operation, and maintenance.
Safety Instruction – Resuscitation Alert! Personnel working with or near high voltages should
be familiar with modern methods of resuscitation. Such information may be obtained from the
Bureau of Medicine and Surgery.
Health and Safety Hazard! Solvent used to clean parts is potentially dangerous. Avoid
inhalation of fumes and also prolonged contact to skin.
Safety Instruction – Do not look at lights! Do not look directly into lights when they are
illuminated. Temporary impairment or permanent vision damage could occur.

Specific Safety Precautions

The following are safety precautions that are related to specific procedures and therefore
appear elsewhere in this publication for emphasis. These are recommended precautions that
personnel must understand and apply during specific phases of installation, operation and
maintenance.
Trained Personnel Only! Only trained and qualified personnel should perform installation
procedures. Only a properly trained and qualified certified electrician should perform electric
installations. Death or serious injury could result if proper installation procedures are not
observed.
Safety Instruction – Mounting Instructions! Be sure to understand all mounting instructions.
The mounting hardware must include proper means to resist vibration loosening such as thread-
locking compound or locking hardware. Failure to follow mounting instructions can result in
death or injury.
vi TP-5543301-C
July 2018