Installation Equipment; Installation Hardware; Table 2-1 Equipment Recommended For Installation; Table 2-2 Installation Hardware - Will Burt NIGHT SCAN Operator's Manual

N S U
IGHT CAN NIVERSAL
Equipment Damage – Qualified Personnel! All persons installing and maintaining this
equipment should be suitably qualified and work to local, regional, and national standards and
codes of practice.

2.2 Installation Equipment

Table 2-1 lists equipment recommended for installation.
Personal Protective
Safety Glasses
Hearing Protection
Hand Tools
Appropriate Hardware
(Section 2.3)
Torque Wrench
* Note:

Depending on the local, regional, and national standards and codes of practice, and the environment,
additional personal protective equipment may be necessary.

Additional equipment, including but not limited to electrical components (e.g. wire, switches, fuses, circuit
breakers, etc.), may be required.

When disposing of any disposables or components, do so according to any applicable local, regional, and
national standards and codes of practice.

2.3 Installation Hardware

Table 2-2 describes hardware that may be used during installation.
Hardware*
Control Box to Mounting Structure
(4) M7 (¼") Sets of
Hardware
* Unless otherwise indicated, the mounting hardware must include proper means to resist vibration loosening such
as thread-locking compound or locking hardware. Torque all hardware as appropriate for its size and grade.
Additional hardware may be required for additional accessories, or customer-specific applications.
2-2
R C S
EMOTE ONTROL YSTEM

Table 2-1 Equipment Recommended for Installation

Recommended Equipment*
Work Gloves
Hard Hat or Helmet
Drill
Wrenches

Table 2-2 Installation Hardware

Supplied By
Customer
'
O M
PERATOR S ANUAL
Nitrile or Vinyl Gloves
Safety Shoes
Level
Washers or Spacers (For
Shimming)
Notes
The screws should be sized to length to allow for
the thickness of the Control Box, mounting
structure, any shims, and all mounting hardware
(e.g. flat washers, lock washers, and nuts).
TP-5543301-C
July 2018