Figure 4-4 Led; Figure 4-5 Receiver Led - Will Burt NIGHT SCAN Operator's Manual

5. The Wireless HHRC will confirm the download is complete by flashing the LED eight
times (Figure 4-4).
6. The Receiver LED Display will flash "Po-Id" (Figure 4-5).
Receiver LED
Display
7. Remove power from the Receiver. This can be done by removing the fuse inside the
Control Box.
8. Remove the Pairing Plug.
9. Re-apply power to the Receiver and close up the Control Box.
TP-5543301-C
July 2018
N S U
IGHT CAN NIVERSAL
LED will
Light

Figure 4-4 LED

Figure 4-5 Receiver LED

R C S
EMOTE ONTROL YSTEM
'
O M
PERATOR S ANUAL
4-5