Error Codes Imatch Interface; Malfunctions Natural Spark Generator - Kalfire G Series Installation Instructions Manual

7.2.3 Error code iMatch interface
Error code Cause
The iMatch interface has
Red light
not yet been installed
in iMatch
or is not provided with a
interface is
sufficient Wi-Fi network
constantly red
strength.
Red/green
LEDs are Distance between
flashing on Wi-Fi point and iMatch
the iMatch interface is too great
interface.
You have not entered the
Wi-Fi settings correctly
in the app

7.3 Malfunctions Natural Spark Generator

No sparks, possible causes
If there is no spark visible (any more), this can have the following
causes:
•
Natural Spark Generator cartridge is empty.
•
No power supply on the Natural Spark Generator -> check
whether the Natural Spark Generator has been connected
correctly. See: Wiring diagram on page 86.
•
Natural Spark Generator pump / coil is defect -> contact
your dealer or Kalfire.
33
Solution
Install the iMatch interface.
Place your Wi-Fi point closed to the iMatch interface (technical unit)
or place a Wi-Fi repeater.
Check the Wi-Fi settings. Erase the added room from the app. Reset the
iMatch interface and try again.