Repairing Driver Squib Circuit Open - Chrysler 300M 1999 Manual

TEST 3A

REPAIRING DRIVER SQUIB CIRCUIT OPEN

Perform TEST 1A Before Proceeding
START TEST 3A.
CAUTION: TAKE
CARE NOT TO DAMAGE
THE CONNECTOR IN
THE NEXT STEP.
WITH THE DRB, READ
THE ACTIVE CODES.
DISCONNECT THE
CLOCKSPRING 2-WAY
HARNESS
CONNECTOR.**
FIG. 2
WITH THE DRB, READ
THE ACTIVE CODES.
*Perform Verification TEST VER-1A.
NOTE: FOR LOCATION
OF ALL COMPONENTS.
SEE GENERAL INFO 4.0
CONNECT A JUMPER
WIRE ACROSS DRIVER
AIRBAG LINE 1 AND
LINE 2 CKTS.
FIG. 1
CONNECT A JUMPER
WIRE ACROSS DRIVER
AIRBAG
LINE 1 AND LINE 2...
**Check connectors - Clean / repair as necessary.
55
WARNING: DISCONNECT
THE BATTERY AND WAIT
2 MINUTES BEFORE
PROCEEDING.
TURN IGNITION ON.
(ENGINE OFF)
RECONNECT THE
BATTERY.
DOES THE DRB
DISPLAY YES
"DRIVER SQUIB CKT
SHORTED"?
NO
CKTS AT THE
CLOCKSPRING 2-WAY
HARNESS CONNECTOR.
FIG. 2
DOES THE DRB
DISPLAY YES
"DRIVER SQUIB CKT
SHORTED"?
NO
DISCONNECT THE
DRIVER AIRBAG
MODULE SQUIB
HARNESS
CONNECTOR.**
M
REPLACE DRIVER
AIRBAG MODULE.*
REPLACE THE
CLOCKSPRING.*
CONTINUE TEST
3A ON THE NEXT
PAGE.
A
I
R
B
A
G
S
Y
S
T
E