Battery - Chrysler 300M 1999 Manual

TEST 14A
REPAIRING PASSENGER SQUIB CIRCUIT SHORTED TO BATTERY
Perform TEST 1A Before Proceeding
START TEST 14A.
TURN IGNITION ON
(ENGINE OFF).
RECONNECT THE

BATTERY.

WARNING: DISCONNECT
THE BATTERY AND WAIT
2 MINUTES BEFORE
PROCEEDING.
TURN IGNITION ON.
RECONNECT THE
BATTERY.
*Perform Verification TEST VER-1A.
NOTE: FOR LOCATION
OF ALL COMPONENTS.
SEE GENERAL INFO 4.0
WITH THE DRB, READ
THE ACTIVE CODES.
DISCONNECT THE
AIRBAG CONTROL
MODULE 23-WAY
HARNESS
CONNECTOR.**
USING A VOLTMETER,
MEASURE THE
PASSENGER AIRBAG
LINE 1 CKT AND THEN
LINE 2 CKT. FIG. 1
**Check connectors - Clean / repair as necessary.
83
WARNING: DISCONNECT
THE BATTERY AND WAIT
2 MINUTES BEFORE
PROCEEDING.
DOES THE DRB
DISPLAY NO
"PASSENGER SQUIB
CIRCUIT SHORTED TO
BATTERY"?
YES
IS THE VOLTAGE YES
ABOVE 0.5 VOLTS ON
EITHER CIRCUIT?
NO
DISCONNECT THE
PASSENGER AIRBAG
MODULE SQUIB HARNESS
CONNECTOR.**
REPLACE THE
PASSENGER AIRBAG
MODULE.*
REPAIR THE PASSENGER
AIRBAG LINE 1
CIRCUIT OR LINE 2
CIRCUIT FOR A SHORT
TO VOLTAGE.*
PERFORM TEST
19A.
A
I
R
B
A
G
S
Y
S
T
E
M