Chrysler 300M 1999 Manual page 281

TEST 5A
CONTINUED - REPAIRING PARK LAMPS THAT WILL NOT TURN ON
TEST 5A
CONTINUED FROM
THE PREVIOUS
PAGE.
USING AN OHMMETER,
MEASURE BETWEEN
GROUND AND THE PARK
LAMP RELAY CONN
CAVITY 53. FIG. 2
USING AN OHMMETER,
MEASURE BETWEEN
GROUND AND THE
PARK LAMP RELAY
CAVITY 55. FIG. 2
WITH THE OHMMETER
STILL CONNECTED.
*Perform Verification TEST VER-2A.
REMOVE FUSE #7 IN
THE JUNCTION BLOCK.
FIG. 1
REMOVE THE BODY
CONTROL MODULE
FROM THE JUNCTION
BLOCK.
271
IS THE FUSE OPEN?
YES
IS THE RESISTANCE
BELOW 5.0 OHMS?
NO
IS THE RESISTANCE
BELOW 5.0 OHMS?
YES
IS THE RESISTANCE
BELOW 5.0 OHMS?
YES
**Check connectors - Clean / repair as necessary.
REPAIR THE OPEN
NO FUSED B(+) CIRCUIT
FROM THE PDC. IF
OK, REPLACE THE
JUNCTION BLOCK.*
YES REPLACE THE
JUNCTION BLOCK.*
NO
REPLACE THE FUSE.*
NO REPLACE THE BODY
CONTROL MODULE.*
REPAIR THE PARK LAMP
RELAY OUTPUT CIRCUIT
FOR A SHORT TO
GROUND. IF OK,
REPLACE THE J/B.
E
X
T
E
R
I
O
R
L
I
G
H
T
I
N
G
S
Y
S
T
E
M