Chime System - Chrysler 300M 1999 Manual

FEATURE DEFAULT
RKE — Rear Press
Release Twice
Toggle
RKE — Not Appli-
Program cable
New FOB
(Using an
already
pro-
grammed
FOB)
3.5

Chime System

The chime system is comprised of an audible chime located internal to the BCM; and is
dependent on various inputs to the BCM to operate. These inputs include key-in ignition switch,
exterior lamps, seat belt switch, and requests from the MIC to chime when some indicators are
turned on.
PROGRAMMING METHOD
Within the 4-10 second range, press
the unlock button while continuing to
press the lock button
Release both buttons
Body Controller will toggle on/off state
of horn chirp feature
Continually press the unlock button for
a minimum of 4 seconds to a maxi-
mum of 10 seconds
Within the 4-10 second range, press
the rear release button while continu-
ing to press the unlock button
Release both buttons
RKE will toggle state of one press/two
press rear release
Turn vehicle ignition switch on.
With programmed FOB continually
press the unlock button for a minimum
of 4 seconds to a maximum of 10 sec-
onds
Within the 4-10 second range, press
the panic button while continuing to
press the unlock button
Release both buttons
Press any button of FOB(S) to be
learned. (Note: RKE system erases all
FOBs when program mode is entered
so any existing FOBs must also be
programmed.
7
FEEDBACK
None
BCM will sound the
chime when program-
ming mode is started
BCM will sound a
second chime after
each FOB has been
learned, a 32 second
time out period has
elapsed, or the vehi-
cle ignition has been
turned off
Turn off ignition or
wait for 32 seconds to
exit programming
mode
G
E
N
E
R
A
L
I
N
F
O
R
M
A
T
I
O
N