Phase, Four Wire Wye - Dranetz ENCORE Series Installation Manual

3 Phase, Four Wire Wye

3 Phase, Four Wire Wye
Type: 3 Phase, Four Wire Wye
Connection
Setup Mode: Wye
LINE
A B C N
LOAD
Connections must be performed in compliance with all safety requirements applicable
CAUTION
to your installation.
Connections of CT leg to ground is recommended, but not required for proper
*NOTE
operation.
3-8
Refer to Fuse Warnings on page 3-4
Fuses
CT Shorting Switch
or Test Block
(optional)
To Switchgear Chassis Ground*
Switchgear
Chassis Ground
SF-303