Table of Contents
Advertisement
Input/Output Module Connectors, continued
Voltage/Current Pods (for Voltage/Current Input Module - Model No. 61MZP):
Measurement
cables, probes
Connects to the Series 5500 Voltage/Current input module via the 25-PIN interface
and pods
cable connector on the rear panel of the instrument. See page 2-22 for more information
(continued)
on voltage/current input pod connection.
The next pages describe the possible voltage and current assembly connections to the
input connectors in the rear panel of 61000.
NOTE: VOLTAGE AND CURRENT PROBES ARE NOT SHOWN
CONNECTED TO THE SPECIFIC INPUT MODULES IN THE CONNECTION
DIAGRAMS PROVIDED BECAUSE THE ACTUAL VOLTAGE CABLE AND
CURRENT PROBES USED ARE DEPENDENT ON THE TYPE OF INPUT
MODULES AND OPTIONAL ACCESSORIES PURCHASED.
See Chapter 3 Circuit Diagrams for Power Monitoring for the wiring connection
diagrams to set up the instrument for monitoring.
2-14
Advertisement
Table of Contents
