Table of Contents
Advertisement
Firmware Upgrade Instructions, continued
Procedure
(continued)
STEP 2: Use the computer to assign the Netburner IP address provided by Dranetz-
STEP 3: Upload the latest firmware version to the unit.
D-2
1.2. Connect one end of the crossover RJ45 Category 5e cable to the 10BaseT
port of the 61000 and the other end to the computer ethernet port.
BMI and establish network connection.
2.1. Run the IPSetup.exe program from the files supplied by Dranetz-BMI.
2.2. Type in 192.168.0.20 in the IP field.
2.3. Type in 255.255.255.0 in the Network Mask field.
2.4. Click on the Set button.
2.5. The following message is displayed under Select a Unit window if the
procedure was done correctly:
MOD5272 [xx-xx-xx-xx-xx-xx] at 192.168.0.20 running :Swordfish COM
2.6. Click on Close to close the program.
3.1. Open Internet Explorer and type in 192.168.0.20 in the IP address bar.
Press return and the following screen will appear.
Type in admin for User name, and password for Password.
NOTE: Use lowercase characters when entering user name and password.
Continued on next page
Advertisement
Table of Contents
