Table of Contents
Advertisement
61000 Accessories
61000 Accessories
The standard accessory included with the 61000 is the Encore Series 61000 System
Standard
accessories
User's Guide, P/N UG-61000.
Refer to Appendix A for the list of hardware and software optional accessories
Optional
accessories
available for use with 61000. The unit mainframe can be custom-built with optional
input module connectors, communication port connectors, GPS antenna connector, and
a 12V dc power input jack.
Specifications for the 61000 measured parameters, computed parameters, voltage
Technical
specifications
modules, current probes, and pod accessories are listed in Appendix B.
To connect to an external dc power source, refer to Appendix C.
External dc
power source
Refer to Appendix D for instructions on how to upload the latest available firmware
Encore Series
61000 firmware
version to the Encore Series 61000 System mainframe.
upgrade
The recommended calibration interval for this unit is once every 12 months.
Calibration
We recommend that you return the unit to the factory for calibration. If you decide to
do so, first contact the Dranetz-BMI Customer Service Department to obtain an
Authorization Number.
Telephone: (732) 287-3680 or 1-800-372-6832
FAX: (732) 248-9240
Fill out the Repair/Service Order form enclosed in the shipping carton and ship it along
with the unit to the Dranetz-BMI Repair Department. (If this form is missing, ask the
Dranetz-BMI Customer Service Department for a replacement.)
1-4
Advertisement
Table of Contents
