Table of Contents
Advertisement
Contact Dranetz-BMI Customer Service for more information on the fused voltage
adapter. Refer to Dranetz-BMI Information Sheet titled Model FVA - Fuse Voltage
Adapter, P/N 899107.
There are two categories of voltage connectors in Voltage Input Modules: one for single
Voltage input
connectors
phase voltage connections, designated VOLTAGE INPUTS, CH D; the other for three
phase connections, designated VOLTAGE INPUTS CH A, CH B, CH C. See the
voltage cable connections diagram below.
In general, the single phase channel D cable is used to measure the neutral to ground
voltage. In this type connection it is referenced as channel D. This cable also can be
used for any single phase connection. See Chapter 3 Circuit Diagrams for Power
Monitoring for the various circuit connections using this cable.
Chapter 2/ Controls, Indicators, and Connectors
2-17
Advertisement
Table of Contents
