Table of Contents
Advertisement
Communications Interface
The 61000 can communicate to a computer via Ethernet network, RS232, RS485, USB,
Communications
options
or land/cellular modem. This remote communication network enables the 61000 to act
as a DataNode for the Encore Series Software, or as a stand-alone monitor.
The computer used must be equipped with the same communication interface as the
Computer
requirements
61000. For example, if the instrument is using Ethernet, the computer must likewise be
using Ethernet.
The computer must be loaded with the Encore Series Software package, which converts
the computer into a web server and enables it to browse data and information collected
by the 61000.
WARNING
To avoid the risk of electric shock, do not remove communications instrument
until all power is de-energized to all power and measurement circuits.
ADVERTENCIA
Para evitar el riesgo de descargas eléctricas, no retire el instrumento de
comunicaciones hasta desconectar todo suministro de energía hacia todos los
circuitos de energía y medición.
AVERTISSEMENT
Pour éviter le risque de choc électrique, ne retirez pas le instrument de
communications avant que tous les circuits d'alimentation et de mesure aient été
mis hors tension.
WARNUNG
Zur Vermeidung eines elektrischen Schlags die Kommunikationsplatte erst
instrument, wenn die Stromzufuhr zu allen Strom- und Meßschaltungen
unterbrochen wurde.
Remote operation setup and instructions for 61000 are contained in the Encore Series
Remote
operation guide
Software User's Guide.
Chapter 2/ Controls, Indicators, and Connectors
2-7
Advertisement
Table of Contents
