Unpacking The 61000 - Dranetz ENCORE Series Installation Manual

Table of Contents

Advertisement

Unpacking the 61000

For maximum protection against possible shipping damage, the 61000 has been sealed
Unpacking
in a two-piece, plastic suspension pack, enclosed within a durable shipping carton.
After opening the carton, inspect the contents for possible shipping damage and check
the carton inventory.
Unpack the 61000 from the carton as follows:
Step
Visually inspect the 61000 for possible shipping damage. If any damage exists, first
Shipping
damage
notify and file an insurance claim with your carrier or underwriter or both. Then notify
inspection
Dranetz-BMI Customer Service Department of your intentions to return the unit. DO
NOT return the 61000 without prior instructions from Dranetz-BMI Customer Service
Department. Dranetz-BMI Customer Service Department can be reached at (732) 287-
3680 or 1-800-372-6832.
If the unit must be returned to Dranetz-BMI for service or repair, wrap the unit securely
Repacking for
return shipment
in heavy packaging material and place in a well padded box or crate to prevent damage.
Do not return the 61000 in an unpadded box. Dranetz-BMI will not be responsible for
damage incurred during transit due to inadequate packing on your part.
Notify Dranetz-BMI Customer Service of your intention of returning the unit. Do not
Return notice
return the unit without prior instructions from Dranetz-BMI. Dranetz-BMI Customer
Service Department can be reached at (732) 287-3680 or 1-800-372-6832.
1
Remove any remaining literature inside the top of the carton.
2
Carefully remove the 61000 from its shipping carton.
3
Remove all accessories inside the carton. Check that the standard (see
page 1-4) and optional accessories (see Appendix A) you ordered are
included.
Chapter 1/ Introduction
Action
1-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Encore 61000

Table of Contents