Table of Contents
Advertisement
The following diagram shows how to connect a current probe to channel A for current
Single phase
current probe
monitoring of a single phase line.
connection
example
The current probe may be connected to the return line if desired to measure the return
current when checking for load current leakage, loop current relationships, etc. If
measuring power, position the probe with the arrow pointing towards the load.
7703-21
Note
The connection example shown above is not recommended without a voltage probe
connected to ensure that the measurements are synchronized to the external source. If
the configuration shown is used, an internal frequency reference must be entered.
To Voltage CH D
To Current CH A
Chapter 2/ Controls, Indicators, and Connectors
SF-211
2-21
Advertisement
Table of Contents
