Connecting to AC Power Source, continued
Follow these steps to connect to an ac power source.
Connecting to
an AC power
source
Step
2-6
1
Set the power switch to Off.
2
Verify the operating voltage range for your 61000, as marked on the
power input decal.
Note: For source voltages outside the range of the unit, a Phase Power
Adapter is available as an optional accessory. It converts the selected
source voltage to the output voltage needed to operate the unit. Refer to
Appendix A Optional Accessories for information.
3
Connect the appropriate power cord for the voltage rating of the unit.
Make connection to the instrument first.
4
Connect power cord to the power source.
5
Turn power switch to On.
Action