Dranetz ENCORE Series Installation Manual page 90

Firmware Upgrade Instructions, continued
STEP 5: Preparing the Encore Series Software and the unit for monitoring.
Procedure
(continued)
D-10
5.1. After uploading the latest firmware to the unit, open Internet Explorer
and type in 192.168.0.20 (or the assigned IP) in the IP address bar. Press
return and the following screen will appear.
Type in admin for User name, and password for Password.
NOTE: Use lowercase characters when entering user name and password.
5.2. Click on OK and the following screen will appear.
5.3. Click on the
Commands.
Scroll down to Put Time enter the correct date and time. Select the
icon. This will send the current time and date entered to the
instrument.
icon found on the left side bar. Then select List
Continued on next page