Set Up Hardware; Set Up Loggernet - Sierra Wireless AirLink RV50 Product Manual

9. Once logged in, check the Status | Home | Network State field. It should read Network
Ready, indicating the RV50 is connected to the cellular network. You can easily test the
RV50 connection to the Internet by selecting the Admin | Advanced tab and using the
PING tool to ping an Internet server, such as www.campbellsci.com.
10. Click the Template button in the ACEmanager toolbar. A template application window will
appear. Browse to and upload one of the configuration templates downloaded from Camp-
bell Scientific.
Template File Name
RV50_115200.xml
RV50_9600.xml
1
CR1000, CR1000X series, CR800 series, CR6 series, CR300 series, CR3000, CR5000
2
CR200(X)
11. Reboot the RV50 after successfully applying the configuration template. You can do this by
clicking the Reboot button on the ACEmanager toolbar, by momentarily pressing the Reset
button (2 sec), or by temporarily removing power from the RV50.

5.2 Set up hardware

The simplest hardware setup for modern dataloggers is to connect a null module cable between
the RS-232 ports of the datalogger and the RV50. See

5.3 Set up LoggerNet

The LoggerNet Network Map is configured from the LoggerNet Setup screen.
NOTE:
Setup has two options, EZ (simplified) and Standard. Click on the View menu at the top of
the Setup screen, and select Standard view.
From the LoggerNet toolbar, click Main > Setup and configure the Network Map as described in
the following steps:
Template Files
Default configuration with RS-232 at 115200 baud and Ethernet
communication enabled.
Default configuration with RS-232 at 9600 baud and Ethernet
communication enabled.
RV50 Sierra Wireless AirLink® 4G LTE Cellular Modem
Description
1
2
Wiring and connections (p. 17)
9