Set Up Loggernet - Sierra Wireless AirLink RV50 Product Manual

Apply to save your changes.

7.6 Set up LoggerNet

The LoggerNet Network Map is configured from the LoggerNet Setup screen.
NOTE:
Setup has two options, EZ (simplified) and Standard. Click on the View menu at the top of
the Setup screen, and select Standard view.
From the LoggerNet toolbar, click Main > Setup and configure the Network Map as described in
the following steps:
1. Select Add Root > IPPort.
2. Select PakBusPort and pbRouter for PakBus data loggers such as the CR1000X.
3. Add a data logger to the IPPort or pbRouter.
4. Select the IPPort in the Network Map. Enter the Konect PakBus Router DNS address and
port number as noted in the Konect PakBus Router setup. The DNS address and port num-
ber are input in the Internet IP Address field separated by a colon. For example,
RV50 Sierra Wireless AirLink® 4G LTE Cellular Modem 25