If the call is successful, the connectors at the bottom of the screen will come together and clock
information from the data logger will be displayed in the Station Date/Time field. If the con-
nection fails, a Communications Failure message will be displayed.
8. Operation
8.1 Ports
RS-232
The RS-232 port is the main port used with Campbell Scientific dataloggers. Its function is
described throughout this manual.
USB
The USB port is not used in Campbell Scientific applications.
Ethernet
The Ethernet port may be used in place of PPP Mode to get to the IP stack of the datalogger.
However, this method comes with higher current drain for both the module and the datalogger.
See
Using the RV50 Ethernet port
(p. 34) for more information.
RV50 Sierra Wireless AirLink® 4G LTE Cellular Modem
28