Raven X HSDPA
9
Hardware Installation
Your Raven X should be mounted in a position that allows
easy access for the cables so they are not bent, constricted, in
close proximity to high amperage, or exposed to extreme
temperatures. The LEDs on the front panel should be visible
for ease of operational verification. You should ensure that
there is adequate airflow around the modem but that it is kept
free from direct exposure to the elements, such as sun, rain,
dust, etc.
In a mobile location, such as a car or truck, ensure the location
is secure both against abrupt movements of the vehicle and
from other items coming into contact with the modem.
Caution: The Raven X is in a hardened case and designed for use in
industrial and extreme environments. However, unless you are using
cables expressly designed for such environments, they can fail if
exposed to the same conditions the Raven X can withstand.
Ethernet
Cellular
Figure 0-12: Raven X Connectors
Cellular
Antennas selected should not exceed a maximum gain of 5 dBi
under standard installation configuration. In more complex
installations (such as those requiring long lengths of cable and/
or multiple connections), it's imperative that the installer
follow maximum dBi gain guidelines in accordance with the
radio communications regulations of the Federal Communica‐
tions Commission (FCC), Industry Canada, or your country's
regulatory body (if used outside the US).
Serial
Power
20070914