At&T; C.2 At&T - Sierra Wireless AirLink RV50 Product Manual

C.2 AT&T
What you need:
AT&T 4G LTE CAT-1 coverage at the data logger site. For a coverage map refer to:
l
t.com/maps/wireless-coverage.html.
AT&T 4G LTE private dynamic IP account in conjunction with Campbell Scientific's Konect
l
Router Service. (An AT&T 4G LTE static unrestricted IP account can also be used. However,
AT&T charges $3/month/device for the static IP account.)
To set up an AT&T account, contact your AT&T Business Account Representative or Blu-Tele-
communications.
Blu-Telecommunications is part of the Alliance Channel with AT&T and can assist any customer
nationwide. Blu-Telecommunications will contact AT&T and work with an AT&T account man-
ager to set up an account.
Contact information for Blu-Telecommunication:
Website: www.blu-tel.com
Phone number: (877) 422-2616, or Email box:
What to ask for: M2M Setup
Who to ask for: Carlos Morales or Andy Tran
An APN must be added onto the account to make the module accessible through the Internet.
For networks with fewer than 30 modules, the standard 'I2Gold APN' can be used; networks with
more than 30 modules will require a 'Custom APN'. A Custom APN has a setup fee starting at
$500 and takes a minimum of 7 to 14 business days to complete. The user must program the APN
name into the module as described in
AT&T will provide a Subscriber Identity Module (SIM) card for each module. The micro-SIM (3FF)
card must be installed inside of the module as described in
to the SIM card, you should receive:
10-digit MSISDN number (telephone number associated with the SIM, used for billing)
l
An APN (Access Point Name) for 4G LTE CAT-1 service. A common APN used for this applic-
l
ation is: BROADBAND. The user must program the APN name into the module as
described in Configure RV50
For static IP accounts only, an IP Address will be included.
l
i2gold@blu-tel.com
Configure RV50 (p. 7).
(p. 7).
RV50 Sierra Wireless AirLink® 4G LTE Cellular Modem
Install the SIM card (p. 3). In addition
www.at-
37