Led Indicator Lights - Sierra Wireless AirLink RV50 Product Manual

8.2 LED indicator lights

When your RV50 is connected to power and an antenna, there is a specific pattern to the lights
to indicate its operation mode as described in the following table:
Color /
LED
Pattern
Off No power or input voltage ≥ 36 Vdc or ≤ 7 Vdc
Solid
Power is present.
Green
Green
with
Power is present and the gateway has a GPS fix.
Amber
Flash
Power
Solid
Standby mode
Red
Flashing When you press the reset button, flashing green indicates when to release
Green the reset button to reboot the gateway.
Flashing When you press the reset button, flashing red indicates when to release the
Red reset button to reset the gateway to the factory default settings.
Solid
Good signal (equivalent to 4–5 bars)
Green
Solid
Fair signal (equivalent to 2–3 bars)
Amber
Poor signal (equivalent to 1 bar)
Signal
Flashing
If possible, Sierra Wireless® recommends moving the gateway to a location
Amber
with a better signal.
Inadequate (equivalent to 0 bars)
Flashing
Sierra Wireless recommends moving the gateway to a location with a better
Red
signal.
NOTE: The quality of the signal strength is measured using the appropriate parameters for the
radio technology in use.
Table 8-1: LED indicator lights
Description
RV50 Sierra Wireless AirLink® 4G LTE Cellular Modem
LED Power Saving Mode
Off
Off
29