Rv50 Mounting Kit; Mounting The Rv50 Flat On The Backplate - Sierra Wireless AirLink RV50 Product Manual

4G/3G Cellular Whip Antenna with SMA Connector: A wideband termination
o
antenna with SMA connector and articulating base. It has a high-efficiency response
on nearly all 4G, 3G, and 2G frequency bands and is, therefore, primarily used with
cellular gateways and routers. This antenna attaches directly to the RV50 and is inten-
ded for use inside the enclosure. Please note that the backplate of the enclosure is a
grounded plane. If it is interposed between the antenna and the cell tower, it may
attenuate the strength of the transmission signal. Simply turning the enclosure 90 to
180 degrees on its mounting mast may solve weak transmission issues.

7.2.1 RV50 mounting kit

7.2.1.1 Mounting the RV50 flat on the backplate

Use the two included flat-head Phillips screws to mount the bracket to the backplate first. Then
use two of the included pan-head Phillips screws to mount the RV50 to the bracket.
RV50 Sierra Wireless AirLink® 4G LTE Cellular Modem 16