Tag Setup Menu - rotork Pakscan IIE System Manual

Pakscan IIE System Manual
8.8.6

Tag Setup Menu

Master station tag
FCU address
FCU's tag
This is the page for editing tag names that may be assigned to the master station and the field units.
Commands available:
-
1
2 -
3 -
-
-
-
MENU
Editing a tag:
An arrow appears beneath the character being edited
Commands available :
CLEAR
LOAD
MENU
58 of 132
1>M/S Tag
2>FCU =
3> Tag
Edit master station's tag
Change field unit address
Edit field unit tag
Go on to next FCU
Go back to previous FCU
Return to previous menu
MSTAG001
^
- The Up and Down arrow keys are used to scroll through the characters
which can be used in tag names. These are:
'A' to 'Z', '0' to '9', plus '-', and 'Space'. (Numbers 0 to 9 can however, be
entered directly via the keypad)
- Abandon editing and start again
- Accept current character and move onto the next one
- Finish editing
Publication S177E V2.0 Issue 03/05
MSTAG001
2
FCUTAG02