rotork Pakscan IIE System Manual page 37

Top Menu – Master Station Status
2. Field Units
For non IQ Actuators -
1.
2.
3.
4.
5.
9.
For General Purpose FCU
1.
9.
For IQ Analogue field unit
1.
9.
For IQ Actuators
1.
2.
3.
4.
5.
9.
For devices not communicating
5.
9. Alarm Data (full text alarm message – only visible if an alarm is present)
37 of 132
Shows status of selected field unit
Open command
Close command
Stop command
Set Desired Value output
Block and Parameter screen
Alarms text
1. Next alarm (if there is one)
Show relay output status
1. Control relay 1
2. Control relay 2
3. Control relay 3
4. Control relay 4
5. Set analogue output
6. Block and Parameter screen
Alarms text
1. Next alarm (if there is one)
Go to Block and Parameter screen
Alarms text
1. Next alarm (if there is one)
Open command
Close command
Stop command
Set Desired Value output
IQ secondary status (Aux Inputs)
1. IQ Opening Torque display
1. IQ Closing Torque display
2. Reload opening torque
3. Block and Parameter screen
2. Block and Parameter screen
Alarms text
1. Next alarm (if there is one)
Block and Parameter screen
Publication S177E V2.0 Issue 12/04
Interface and Menus
1. FCU number
2. Block select
3. Parameter
select