Table of Contents
Advertisement
Pakscan IIE System Manual
8.8.3
Data transfer to Standby Unit
This page displays the "copy to standby" options and their current settings. This option is only
available on hot standby master stations and allows data to be automatically transferred from the main
unit to the standby unit. The default setting for all three options is "ON".
Commands available:
1
-
-
2
3
-
-
MENU
54 of 132
1>Copy to Standby
2>Copy address ON
3>Copy M/S tag ON
Copy all settings from the main to standby unit except those listed below
Copy the master station Modbus address from main to standby unit.
Copy the master station tag from main to standby unit.
Return to previous menu
Publication S177E V2.0 Issue 03/05
Copy data to standby unit
ON
Copy master station address
Copy master station tag
Advertisement
Table of Contents
Need help?
Do you have a question about the Pakscan IIE and is the answer not in the manual?
Questions and answers