Installing The Seat; Installing The Seat Belt; Installing The Manual Tube - Toro Groundsmaster 3280-D Operator's Manual

1. Handle
3

Installing the Seat

Parts needed for this procedure:
1 Seat—Model 30398 (optional kit)
Mechanical Seat Suspension Kit—Model 30312
1 (optional kit) or Pneumatic Seat Suspension
Kit—Model 30313 (optional kit)
Procedure
The Groundsmaster 3280-D machine comes without
the seat assembly. Obtain and install the optional
seat (Model No. 30398) and the Mechanical Seat
Suspension Kit (Model 30312) or the Pneumatic Seat
Suspension Kit (Model 30313). Refer to the seat kit
for the installation instructions.
Note:
Refer to 5 Installing the Manual Tube (page
13) before mounting the seat to the seat suspension.
Figure 5
2. Hood-cable bracket
4

Installing the Seat Belt

Parts needed for this procedure:
1 Seat belt
2 Bolts (7/16 x 1 inch)
g198430
2 Lock washer (7/16 inch)
2 Flat washer (7/16 inch)
Procedure
Note:
You must mount the latch of the belt to the
right side of the seat.
1. Seat-belt latch
1. Assemble the end of each seat-belt latch to the
holes in the back of the seat with 2 bolts (7/16
x 1 inch), flat washers (7/16 inch), and lock
washers (7/16 inch)
2. Torque the bolts to 61 to 75 N∙m (45 to 55 ft-lb).
5

Installing the Manual Tube

Parts needed for this procedure:
1 Manual tube
2 R-clamp
Procedure
1. Remove the manual tube and R-clamps secured
to the seat plate.
13
Figure 6
(Figure 6).
g012266