Product Overview; Controls - Toro Groundsmaster 3280-D Operator's Manual

Product Overview

1. Steering wheel
2. Traction pedal

Controls

Traction Pedal
The traction pedal (Figure
move forward and rearward. Using the heel and
toe of the right foot, press the top of the pedal to
move forward and the bottom of the pedal to move
rearward. The ground speed is proportionate to how
far you press the pedal. For maximum ground speed,
you must fully press traction pedal while throttle is in
the F position. The maximum speed forward is
AST
approximately 16 kp/h (10 mph). To get maximum
power under heavy load or when ascending a hill,
have the throttle in the F
traction pedal slightly to keep the engine speed (rpm)
high. When the engine speed begins to decrease,
release the traction pedal slightly to allow the engine
speed to increase.
3. Brakes
4. Cutting unit
15) makes the machine
position while pressing
AST
Figure 14
1. Traction pedal
Tilt-Steering Control
The tilt-steering control is a lever on the right side
of the steering column
rearward to adjust the steering wheel to the desired
20
5. Hood/engine compartment
6. Roll bar
Figure 15
(Figure 16). Pull the lever
g001529
g035077