Accessing The Fuse Block And Standard Control Module - Toro Groundsmaster 3280-D Operator's Manual

Accessing the Fuse Block
and Standard Control
Module
Removing the Control-Panel Plate
1. Remove the 4 thumb screws that secure the
control-panel plate to the fuel tank
Figure 52
1. Fuel tank
2. Thumb screw
2. Lift the control-panel plate
3. Disconnect the electrical connectors from the
switches and warning lights as necessary to
access the fuse block or the standard control
module.
(Figure 52).
g198540
3. Control-panel plate
(Figure 52).
Installing the Control-Panel Plate
1. Connect the electrical connectors to the switches
and warning lights that you disconnected in step
3 of Removing the Control-Panel Plate (page
48).
2. Align the 2 tabs at the bottom of the side panel
with the 2 slots in the frame for the console
(Figure 53).
1. Tabs (side panel)
3. Align the slots in the top of the control-panel
plate with the holes in the flange of the fuel tank
(Figure 52).
4. Assemble the control panel plate to the flange
of the fuel tank with the 4 thumb screws
52) that you removed in step
Control-Panel Plate (page
48
Figure 53
2. Slots (frame—console)
1 of Removing the
48).
g034111
(Figure