Using The Hardware For Attachments - Toro Groundsmaster 3280-D Operator's Manual

Cutting Deck
52 inch Side Discharge Deck
(Model 30555)
60 inch Side Discharge Deck
(Model 30366) or 62 in Base
Deck (Model 30403) or 62 in
Side Discharge Deck (Model
30551)
72 inch Side Discharge Deck
(Model 31336) or 72 in Base
Deck (Model 30404) or 72
in Guardian Recycler Deck
(Model 31335)
8. Shut off the engine.
9. Tighten the jam nut at the bottom of the
weight-transfer spool, and torque the nut to
13-16 N∙m (10-12 ft-lb).
10. Remove the pressure gauge from the test port.
12
Using the Hardware for
Attachments
Parts needed for this procedure:
1 Roll pin
2 Bolt (5/16 x 1-3/4 inches)
2 Locknut (5/16 inch)
2 Cylinder pin
4 Cotter pin (3/16 x 1-1/2 inches)
2 Brake-return springs
Procedure
1. Save the roll pin, bolts (5/16 x 1-3/4 inches), and
locknuts (5/16 inch) to secure the universal shaft
to an implement.
2. Save the cylinder pin and cotter pin (3/16 x 1-1/2
inches) to secure the deck lift arms to the lift
cylinder.
3. Save the brake return springs to mount the deck
lift arms.
Weight-Transfer Pressure
827 kPa (120 psi)
1620 kPa (235 psi)
1930 kPa (280 psi)
19