Shimano Alfine S7000 Series Dealer's Manual page 33

ADJUSTMENT
Adjusting the cassette joint
For internal 11-speed
1
(B)
2
(z)
Set the shifting lever from 11 to 6 .
Check to be sure that the yellow setting
lines on the cassette joint bracket and
pulley are aligned at this time.
If the yellow setting lines are not
aligned, turn the cable adjustment barrel
of the shifting lever to align the yellow
setting lines.
After this, move the shifting lever once
more from 6 to 11 and then back to 6 ,
and then re-check to be sure that the
yellow setting lines are aligned.
(A)
After adjusting the cassette joint, cut off
the excess length of inner cable.
Then install the inner end cap.
After attaching the inner end cap, bend
the inner cable outward (toward the
frame end) to prevent it from coming in
contact with the chain.
(z)
(A)
25 – 30 mm
33
(A)
Yellow setting lines
(B)
Cable adjustment barrel
TECH TIPS
•
The yellow setting lines on the cassette
joint are located in two places. Use the one
that is easiest to see.
< When bicycle is standing up >
Should be straight
Cassette joint pulley
Cassette joint bracket
< When bicycle is upside down >
Should be straight
Cassette joint pulley
Cassette joint bracket
(A)
Inner end cap