Related Manuals for Shimano METREA SL-U5000
Summary of Contents for Shimano METREA SL-U5000
- Page 1 (English) DM-UASL001-01 Dealer's Manual ROAD Trekking City Touring/ URBAN SPORT E-BIKE Comfort Bike Shifting lever METREA SL-U5000...
-
Page 2: Table Of Contents
CONTENTS IMPORTANT NOTICE ..........................3 TO ENSURE SAFETY ..........................4 LIST OF TOOLS TO BE USED ......................... 6 INSTALLATION ............................8 Installation to the handlebar ........................8 MAINTENANCE ........................... 10 Replacement of the inner cable ........................ 10 Replacement and assembly of the shifting lever unit ................10... -
Page 3: Important Notice
Do not disassemble or modify the product other than as stated in the information contained in this dealer’s manual. All dealer’s manuals and instruction manuals can be viewed on-line on our website (http://si.shimano.com). Please observe the appropriate rules and regulations of the country, state or region in which you conduct your business as a dealer. -
Page 4: To Ensure Safety
Be sure to follow the instructions provided in the manuals when installing the product. It is recommended to use genuine Shimano parts only. If parts such as bolts and nuts become loose or damaged, the bicycle may suddenly fall over, which may cause serious injury. -
Page 5: List Of Tools To Be Used
LIST OF TOOLS TO BE USED... - Page 6 LIST OF TOOLS TO BE USED LIST OF TOOLS TO BE USED The following tools are needed for installation, adjustment, and maintenance purposes. Tool Tool Tool 2mm Allen key 4mm Allen key Screwdriver[#1]...
-
Page 7: Installation
INSTALLATION... -
Page 8: Installation To The Handlebar
INSTALLATION Insert the protrusion on the shifting lever bracket into INSTALLATION the hole in the brake lever bracket. Installation to the handlebar Use an Allen key to open the clamp band of the brake lever as shown in the illustration. (A) Clamp band (B) 2mm Allen key Secure the clamp band of the brake lever with an Allen... -
Page 9: Maintenance
MAINTENANCE... -
Page 10: Replacement Of The Inner Cable
MAINTENANCE MAINTENANCE Replacement and assembly of the shifting lever unit Disassembly and assembly should only be carried out when Replacement of the inner cable replacing the shifting lever unit. Loosen the cable fixing bolt (nut) of the front derailleur Operate the lever shown in the illustration to set the or rear derailleur, and then pull the inner cable out of chain on the smallest chainring/smallest sprocket and the shifting lever unit in the same way as when in-... - Page 11 MAINTENANCE Remove the four shifting lever unit mounting screws, and then remove the shifting lever unit as shown in the illustration. * When installing, reverse the procedure. (A) Shifting lever unit mounting screw (large) (B) Shifting lever unit mounting screw (small) Shifting lever unit mounting screw (Large) tightening torque Screwdriver[#1]...
- Page 12 Please note: specifications are subject to change for improvement without notice. (English) © March 2016 by Shimano Inc. HTR...