Replacement Of The Inner Cable; Replacement And Assembly Of The Shifting Lever Unit - Shimano METREA SL-U5000 Dealer's Manual

MAINTENANCE
MAINTENANCE

Replacement of the inner cable

1.
Operate the lever shown in the illustration to set the
chain on the smallest chainring/smallest sprocket and
then install the inner cable.
Remove the wire end hooking cap when installing the
inner cable.
* The illustration is of the rear lever.
(A) Wire end hooking cap
(B) Inner cable
(C) Lever
Specifications
2-speed
11-speed
Lever operation count
1 or more times
10 or more times
Replacement and assembly of the shifting
lever unit
Disassembly and assembly should only be carried out when
replacing the shifting lever unit.
1.
Loosen the cable fixing bolt (nut) of the front derailleur
or rear derailleur, and then pull the inner cable out of
the shifting lever unit in the same way as when in-
stalling the inner cable.
2.
Remove the adjustment bolt.
3.
Remove the unit fixing bolt.
(A) Unit fixing bolt
Tightening torque
10
4mm Allen key
2.5 N·m
{22 in. lbs.}